OVERVIEW
- Roundup® Dual Action Weed & Grass Killer Plus 4 Month Preventer with Pump ‘N Go® 2 Sprayer kills existing weeds and grass down to the root and prevents new weeds from growing for up to 4 months
- This weed killer and preventer is rainproof in as fast as 30 minutes, and produces visible results in as fast as 6 hours
- Apply this herbicide to hardscapes and landscapes – cracks and crevices in driveways, sidewalks, and patios, along fences, in mulched beds or around the base of well-established desirable plants, shrubs, or trees, and on gravel areas
- All ornamental bedding plants, trees, shrubs, sod, and seed can be planted 4 months after application
- Pump ‘N Go® 2 Sprayer with an extendable wand provides 10 minutes of continuous spray (to prevent new weeds and grasses from growing, you must spray the entire area you want to control, not just the emerged weeds)
DESCRIPTION
Root out the toughest weeds and grasses with Roundup® Dual Action Weed & Grass Killer Plus 4 Month Preventer with Pump ‘N Go®. This formula kills existing weeds and grass down to the root, and prevents new weeds from growing for up to 4 months by creating an invisible barrier in the soil. Apply only where you want to kill existing weeds AND prevent future weed growth for up to 4 months, such as cracks and crevices in driveways, sidewalks, and patios, along fences, in mulched beds or around the base of well-established desirable plants, shrubs, or trees, and on gravel areas. In order to prevent new weeds and grasses from growing, you must spray the entire area you want to control, not just the emerged weeds. For best results, apply during warm, sunny weather above 60°F. Rain or watering 30 minutes after application will NOT wash away effectiveness. After application, weeds will begin to yellow and wilt within hours with complete kill in 1 to 2 weeks. All ornamental bedding plants (annuals and perennials), trees, shrubs, sod and seed can be planted 4 months after application. Roundup® Dual Action covers up to 300 sq. ft.
Step by Step Instructions
- CUT – Carefully cut the zip ties securing the hose and pump handle with scissors. Use caution not to cut the white house.
- 2. CONNECT – Unwind hose. Firmly push the connector at the end of the hose into the spout on the pump, until it locks into place
- 3. EXTEND WAND – Lift sprayer wand off bottle. Push yellow button while pulling out on the wand nozzle tip. Fully extend wand until yellow button snaps into SPRAY POSITION. Note: Trigger will not function until wand is fully extended and yellow button is visible in the SPRAY POSITION.
- 4. PUMP – Make sure handle is screwed on tightly or the bottle will not pressurize. Pump container 25-30 times to pressurize bottle. A full bottle requires fewer pumps than an empty bottle. Pumping to the higher range will provide longer spray duration. After pumping, push pump down and turn handle clockwise to lock into carrying position. NOTE: This bottle is designed to expand under pressure and cannot be over-pressurized.
- 5. SPRAY – Aim wand. Spray by pushing down trigger with thumb. Adjust spray pattern by rotating nozzle tip up to one-half rotation. SPray weeds until thoroughly wet.
- 6. STORE – When finished spraying, push the yellow button and retract the wand until the yellow button snaps back into the original STORAGE POSITION. Place wand back onto the top of the bottle in the integrated holster with nozzle tip extended through the eyelet opening.
- 7. DEPRESSURIZE – Push pump handle all the way down and turn pump handle and cap counterclockwise to relieve pressure, then retighten to store.
WHEN AND WHERE TO USE
Where Not to Use
- Do NOT Spray…
- Plants or grasses you like – they will die.
- Landscaped areas around young plants or in areas that will be planted or seeded within 4 months.
- In lawns or for lawn renovation as this product prevents desirable grasses from growing too.
- For vegetable garden preparation or in and around fruits and vegetables.
- Next to a fence if desirable plants and grasses are growing on the other side.
Where to Use
Apply only where you want to kill existing weeds AND prevent future weed growth for up to 4 months, such as:
- On cracks and crevices in driveways, sidewalks, walkways and patios
- Along fences, foundations, retaining walls, and curbs
- In mulched beds or around the base of well-established (at least 6 months old) desirable plants, shrubs or trees
- Gravel areas
- On parking areas and under decks
When to Apply
- For best results, apply during warm, sunny weather above 60°F. Spray when air is calm to prevent drift to desirable plants.
How Often to Apply
- Wait at least 2-3 months before spraying a previously treated area.
Where to Use
- Apply only where you want to kill existing weeds AND prevent future weed growth for up to 4 months, such as:
- -On cracks and crevices in driveways, sidewalks, walkways and patios
- -Along fences, foundations, retaining walls, and curbs
- -In mulched beds or around the base of well-established (at least 6 months old) desirable plants, shrubs or trees
- -Gravel areas
- -On parking areas and under decks
- When to Apply
For best results, apply during warm, sunny weather above 60°F. Spray when air is calm to prevent drift to desirable plants. - How Often to Apply Wait at least 2-3 months before spraying a previously treated area.