HydroBloom B: Liquid Hydroponic Blooming Mix Discount Order

Active Constituents:

Magnesium 0.45 % W/V

Calcium 0.75 % W/V

Sulphur 0.45 % W/V

Trace Elements present as salts of reduced monosaccharide complex and E.D.T.A.;

Iron 0.024 % W/V, Copper 0.017 % W/V

Manganese 0.017 % W/V, Zinc 0.006 % W/V

Boron 0.008 % W/V

Molybdenum 0.00023 % W/V

 

Main Features:

* A very effective mix of mineral nutrients and state-of-the-art organic chelates.

* Suitable for all growing media & hydroponic systems.

* Remarkably stable even in extreme climatic conditions.

* Capable of producing exceptionally rapid plant growth.

* Provides total availability of all nutrient requirements.

* Dual chelator – acid and alkaline.

* The fully chelated micro-nutrients are boosted to higher levels than other mixes.

* The concentrated formula provides high potency at low cost.

* Stunning results assured when used correctly.

* Manufactured in Australia.

INSTRUCTIONS:

Always use equal amounts of A and B. Never mix A and B in concentrated form.

Shake bottles before use.

To obtain a solution of 1,300 ppm (see below), add the required amount of Part A to water in your tank.  Repeat for Part B.  Then top up the tank to full volume.  The use of a pH meter and a conductivity meter is recommended to ensure the maintenance of correct pH and strength.

1,300 ppm (parts per million) is equal to

1.857 mS/cm, or about equal to a cF (Conductivity Factor) of 19.

This strength is suitable for most purposes.

In general a pH (acidity/alkalinity) of 6.0 – 6.5 should be aimed for.

Tank/Litres	Part A	Part B
10	50ml	50ml
50	250ml	250ml
100	500ml	500ml
200	1000ml	1000ml